Front hub question

Ade

Liverpool

Hi there, first time poster to these forums... mainly because I don't own a Princess or variant of - but, I do (I think) own a little bit of one.... Allow me to explain. I own & race an ex BTCC Ford Capri. It was built sometime in the late 1970s, and raced - with some success - in the 1978 & 1979 BTCC. Then, through a succession of other owners, it's arrived with me. The thing is, it takes Austin Princess brake pads (i.e. I have Princess calipers, made by Lockheed). I've also discovered that I have a bent bearing carrier on one side, which results in some wheel wobble; it's this I want to rectify. The problem is, I don't know if the bearing carrier is Princess as well - if it is, I then need to find one. Please have a look at the following images: http://www2.ossjo.com/images/hubs1.jpg and http://www2.ossjo.com/images/hubs2.jpg The short one on the right is a Triumph TR7 hub - which looked remarkably similar until I took it apart & discovered it's an inch too short, and the bolt centres aren't quite right either. The nose (of the desired hub) is a shade under 3"" long, and measuring from centre-to-centre, the fixing bolts are either 2 1/2"" or 2 9/16"" (measured from 12-o'clock to 3-o'clock positions) apart compared with around 1/16"" less for the Triumph parts. So.... can anyone tell me if that's a Princess hub? Many thanks in advance. Cheers, Ade.